Patching Compounds

English | Spanish

A fast-curing, cement-based patching and skim coating compound that provides a smooth finish to a variety of substrates prior to the installation of floor coverings. Excellent as an embossed vinyl floor leveler. Apply from feather edge up to 1/2" (13 mm) thick. Formulated with Controlled Cure Technology^®, SpeedFinish™ eliminates installation problems of bond failure, crumbling and staining of resilient flooring due to free-moisture found in traditional underlayments. It allows installation of most floor coverings in as little as 15 minutes. SpeedFinish™ can also be used as a skim coat or encapsulation material over RedGard^® Waterproofing and Crack Prevention Membrane when installing resilient floor coverings.
View Downloads:
Technical Data Sheet - English | Technical Data Sheet - Spanish | SDS - English | SDS - Spanish
------------------------------------------------------------------------------------------------------------------------------------------------------

A fast-setting, polymer-modified, cement-based compound that provides a smooth finish to interior and exterior subfloors prior to the installation of a floor covering. Mix with water to patch and level concrete or plywood as thick as 1/2" (13 mm); mix with Patching & Leveling Latex Additive to form an ultra high-strength system over a variety of floor coverings or as an embossed vinyl floor leveler.
View Downloads:
Technical Data Sheet - English | Technical Data Sheet - Spanish | SDS - English
------------------------------------------------------------------------------------------------------------------------------------------------------

Increases adhesion and performance when skim coating or patching hard-to-bond surfaces. Use in place of water to increase the bond strength of Skim Coat & Patch or SpeedFinish™ patching compounds. When mixed with Skim Coat & Patch Cement Underlayment, it forms an ultra, high-strength system over ceramic tile, stone, terrazzo, vinyl sheet goods, VCT, cutback adhesive or as an embossed vinyl floor leveler.
View Downloads:
Technical Data Sheet - English | Technical Data Sheet - Spanish | SDS - English
------------------------------------------------------------------------------------------------------------------------------------------------------

A lightweight Portland cement-based, pre-blended mortar for use as a bedding or brown coat. Formulated for very low shrinkage and exceptional bond strength. Use on floors, walls and counters and for overhead work such as showers, arches and coves. Just add water and mix. No job site blending of powders required.
View Downloads:
Technical Data Sheet - English | Technical Data Sheet - Spanish | SDS - English
------------------------------------------------------------------------------------------------------------------------------------------------------

Floor Mud produces an excellent underlayment for floor tile installations. FLOOR MUD is a factory blend of Portland cement, sand and chemical modifiers for floating shower pans and other floor areas. Meets ANSI A108.1, A108.4, A108.5 and A108.6.
View Downloads:
Data Sheet, English | Data Sheet, Spanish | SDS - English
------------------------------------------------------------------------------------------------------------------------------------------------------

Wall Mud is a pre-mixed lightweight, Portland cement and sand-based browncoat designed as a plaster substrate for vertical interior tile applications. It is lighter in weight than conventional mud, imposing less dead load on structural members.
View Downloads:
Data Sheet, English | Data Sheet, Spanish | SDS - English
------------------------------------------------------------------------------------------------------------------------------------------------------